Customer statement regarding single phase 8/10/12kW Energy Controllers (inverters) in Australia and New Zealand

There are some important updates regarding our single phase 8/10/12kW Energy Controllers (inverters) with quick connect AC plugs (requiring ferrules and crimping) in Australia and New Zealand.

There has been an issue with a small number of damaged AC plugs on a subset of inverter models.

There have been minor installation issues with these AC plugs.

This has been confirmed by Sigenergy engineers who have attended sites where AC plugs have failed. It was found that these systems were not installed as per Sigenergy installation instructions. We have documented evidence of these instances and supplied them to the electrical regulators.

We value our installation partners and know how much our customers rely on you to access our products and we will work together with you to address these issues.

Please know that we take this matter extremely seriously.

We have been working closely and collaboratively with the State Electrical Regulators and other relevant authorities to progress our investigations, and we have developed a suitable plan to ensure that end users, installers and all relevant parties have a positive and safe experience with Sigenergy products.

The issue only applies to our single phase 8/10/12kW Energy Controllers (inverters), which have a different style AC plug that requires the use of ferrules and crimping.

To assist installers on future installs we have updated the AC plug on single phase 8/10/12kW Energy Controllers (inverters) so that they align with those used on our three phase inverters. This type of AC plug does not require the use of ferrules or crimping.

We are working with installers to proactively replace affected inverters with a free replacement inverter that has an updated AC plug.

Installers will have the option of replacing each inverter on the products they have installed themselves, in which case we will pay $500 per replacement, or we will replace them directly through our Sigenergy Service Partners.

Our priority is the customer. All single phase 8/10/12kW Energy Controllers (inverters) that are online have already received a firmware update which allows us to monitor each system proactively,  and temporarily reduce the AC output if the inverter is operating at sustained full load. This prevents the AC plug from overheating and becoming damaged, in the event that it has not been correctly installed. All affected products that are online have already received the firmware update.

This should only affect a small number of installed single phase 8/10/12kW Energy Controllers (inverters) and is a temporary precautionary measure in case they have not been installed as per Sigenergy installation instructions. Once the inverter is replaced, this limit will be removed.

Systems that are not connected to the internet and have not received the firmware update will be replaced as a top priority.  We have full details of disconnected systems for tracking purposes and are conducting daily checks to ensure the firmware update is applied, should these systems connect to the internet.

We will also provide affected customers with an additional 2-year warranty on the replacement  inverter which will apply in addition to our standard 10-year warranty (i.e. a total warranty period of 12 years).
Please note that you cannot continue installing inverters with the current AC plug design (these are the plugs that require ferrules and crimping).  Our inverter with the updated AC plug has been approved by the Clean Energy Council (CEC). Effective immediately, you can conduct the installation of the inverter with the updated AC plug. You can contact your distributors to arrange delivery or collection of the new version.

As of November 20 2025 all newly installed single-phase 8/10/12kW inverters that use the quick-connect AC plug are not eligible for STC rebates.
If you have installed the older quick-connect AC plug and have submitted and received the STC rebate, you need to replace that system with the new OT terminal-style AC connection design when stock is available to you.

Installers will have the option of replacing each inverter on the products they have installed themselves, in which case we will pay $500 per replacement, or we will replace them directly through our Sigenergy Service Partners.

We are systematically working through inverter replacements. You will receive a ticket in the mySigen app with detailed instructions regarding any replacements assigned to you. You will then have the option to accept or pass on to our Sigenergy service partner who can carry out the work on your behalf.

For those installers and retailers who have installed the single-phase 8/10/12kW inverters that use the quick-connect AC plug (requiring ferrules and crimping) on or before November 19, and have not yet received the STC rebate, you must replace it to the new OT terminal-style AC connection design.  Once the new inverter is installed, the STC rebate will be processed.  Again, installers will have the option of replacing the inverter themselves or we will replace them directly through our Sigenergy Service Partners.

Any installation of inverters with the new OT terminal-style AC connection design from November 20 2025, will have their STC rebates processed in the regular way.

We are systematically working through inverter replacements. You will receive a ticket in the mySigen app with detailed instructions regarding any replacements assigned to you. You will then have the option to accept or pass on to our Sigenergy service partner who can carry out the work on your behalf.

If you have any questions or concerns, please don’t hesitate to reach out to our customer care team at sigenservice.au@sigenergy.com.

Thanks for your support, understanding and patience during this process.


The recall notice may be found on the ACCC’s Product Safety website here: https://www.productsafety.gov.au/search-consumer-product-recalls/sigenstor-ec-80100120kw-sp-au-energy-controllers 

Contact Us